Există o comanda MySQL pentru a localiza meu.cnf
fișier de configurare, similar cu modul în care PHP's phpinfo()
localizează sale php.ini
?
Nu există nici interne comanda MySQL pentru a urmări acest lucru, l's un pic prea abstract. Fișierul ar fi în 5 (sau mai multe?) locații, și toate vor fi valabile, pentru că sarcina în cascadă.
Acestea sunt locațiile implicite MySQL se uită la. Dacă se constată mai mult de una, se va încărca fiecare dintre ele & valorile suprascrie reciproc (în ordinea listată, cred). De asemenea, --implicite-file
parametru poate trece peste tot, deci, practic, o's o mare durere în fund.
Dar mulțumesc pentru a fi atât de confuz, nu's o șansă bună de l's doar în /etc/my.cnf.
(dacă doriți doar pentru a vedea valorile: SPECTACOL VARIABILE`, dar'll nevoie de aceste permisiuni.)
Puteți, de fapt, "cerere" MySQL pentru o listă de locații, în căutarea mea.cnf (sau a mea.ini pe Windows). Nu este o interogare SQL totuși. Mai degrabă, executa:
$ mysqladmin --help
sau, înainte de 5.7:
$ mysqld --help --verbose
În primele linii, veți găsi un mesaj cu o listă a tuturor mea.cnf locații se pare pentru. Pe masina mea este:
Default options are read from the following files in the given order:
/etc/my.cnf
/etc/mysql/my.cnf
/usr/etc/my.cnf
~/.my.cnf
Sau, pe Windows:
Default options are read from the following files in the given order:
C:\Windows\my.ini
C:\Windows\my.cnf
C:\my.ini
C:\my.cnf
C:\Program Files\MySQL\MySQL Server 5.5\my.ini
C:\Program Files\MySQL\MySQL Server 5.5\my.cnf
Totuși, rețineți că acesta ar putea fi cazul în care nu există mea.cnf la oricare dintre aceste locații. Deci, puteți crea fișier de pe propriul dvs. - de a folosi una de proba fișiere de configurare furnizate cu MySQL distribuție (pe Linux - a se vedea /usr/share/mysql/*.cnf
fișiere și de a folosi oricare dintre acestea este potrivit pentru tine - copie a /etc/my.cnf
și apoi modifica după cum este necesar).
De asemenea, rețineți că există, de asemenea, o opțiune de linie de comandă --implicite-fișier
care poate defini personalizat calea mea.cnf sau a mea.ini. De exemplu, acesta este cazul pentru MySQL 5.5 pe Windows - punctele de la o meu.ini în directorul de date, care în mod normal nu este listat cu mysqld --help --verbose
. Pe Windows - service, vezi proprietăți pentru a afla dacă acesta este cazul pentru tine.
În cele din urmă, verificați https://dev.mysql.com/doc/refman/8.0/en/option-files.html - este descrisă în mai multe detalii.
Puteți folosi :
locate my.cnf
whereis my.cnf
find . -name my.cnf
Acest lucru ar putea lucra:
strace mysql ";" 2>&1 | grep cnf
pe masina mea acest ieșiri:
stat64("/etc/my.cnf", 0xbf9faafc) = -1 ENOENT (No such file or directory)
stat64("/etc/mysql/my.cnf", {st_mode=S_IFREG|0644, st_size=4271, ...}) = 0
open("/etc/mysql/my.cnf", O_RDONLY|O_LARGEFILE) = 3
read(3, "# /etc/mysql/my.cnf: The global "..., 4096) = 4096
stat64("/home/xxxxx/.my.cnf", 0xbf9faafc) = -1 ENOENT (No such file or directory)
Deci, se pare ca /etc/mysql/my.cnf este unul deoarece stat64() si read() au fost de succes.
În mod implicit, mysql search meu.cnf primul la /etc dosar. Dacă nu există nici un /etc/my.cnf în acest dosar, vă sfătuiesc să creați unul nou în acest dosar indicate de documentația (https://dev.mysql.com/doc/refman/5.6/en/option-files.html).
Puteți căuta, de asemenea, pentru existenta mea.cnf mobilat de instalare mysql. Puteți lansa următoarea comandă
sudo find / -name "*.cnf"
Puteți utiliza următoarele fișier de configurare cu myisam masă și fără innodb suport mysql (de la portul de instalare mysql pe mac os x maverick). Vă rugăm să verificați dacă fiecare comandă în acest fișier de configurare.
# Example MySQL config file for large systems.
#
# This is for a large system with memory = 512M where the system runs mainly
# MySQL.
#
# MySQL programs look for option files in a set of
# locations which depend on the deployment platform.
# You can copy this option file to one of those
# locations. For information about these locations, see:
# http://dev.mysql.com/doc/mysql/en/option-files.html
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
[client]
#password = your_password
port = 3306
socket = /opt/local/var/run/mysql5/mysqld.sock
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
socket = /opt/local/var/run/mysql5/mysqld.sock
skip-locking
key_buffer_size = 256M
max_allowed_packet = 1M
table_open_cache = 256
sort_buffer_size = 1M
read_buffer_size = 1M
read_rnd_buffer_size = 4M
myisam_sort_buffer_size = 64M
thread_cache_size = 8
query_cache_size= 16M
# Try number of CPU's*2 for thread_concurrency
thread_concurrency = 8
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# binary logging format - mixed recommended
binlog_format=mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /opt/local/var/db/mysql5
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /opt/local/var/db/mysql5
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 20M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 64M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
[mysqldump]
quick
max_allowed_packet = 16M
[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[myisamchk]
key_buffer_size = 128M
sort_buffer_size = 128M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
După cum sa menționat de către konyak puteți obține lista de locuri mysql va arata pentru meu.cnf
fișier de funcționare mysqladmin --help
. Deoarece acest lucru este destul de detaliat puteți obține la partea îți pasă de rapid cu:
$ mysqladmin --help | grep -A1 'Default options'
Acest lucru vă va oferi de ieșire similare pentru:
Default options are read from the following files in the given order:
/etc/my.cnf /etc/mysql/my.cnf /usr/local/etc/my.cnf ~/.my.cnf
În funcție de cât ai instalat mysql este posibil ca nici unul dintre aceste fișiere sunt prezente încă. Puteți " cat " i pentru a vedea cum config este în curs de construit și de a crea propriul meu.cnf` dacă este necesar, la locația preferată.
mysql --help | grep /my.cnf | xargs ls
va spune unde `meu.cnf este situat pe Mac/Linux
ls: cannot access '/etc/my.cnf': No such file or directory
ls: cannot access '~/.my.cnf': No such file or directory
/etc/mysql/my.cnf
În acest caz, este în /etc/mysql/my.cnf
ls: /etc/my.cnf: No such file or directory
ls: /etc/mysql/my.cnf: No such file or directory
ls: ~/.my.cnf: No such file or directory
/usr/local/etc/my.cnf
În acest caz, este în /usr/local/etc/my.cnf
Daca're pe un Mac cu Homebrew, utilizare
prepara info mysql
Te'll vedea ceva de genul
$ brew info mysql
mysql: stable 5.6.13 (bottled)
http://dev.mysql.com/doc/refman/5.6/en/
Conflicts with: mariadb, mysql-cluster, percona-server
/usr/local/Cellar/mysql/5.6.13 (9381 files, 354M) *
Ultima linie este INSTALLERDIR
pe MySQL docs
Va trebui să se uite prin diferite locații, în funcție de versiunea de MySQL.
mysqld --help -verbose | grep my.cnf
For Homebrew:
/usr/local/Cellar/mysql/8.0.11/bin/mysqld (mysqld 8.0.11)
Default possible locations:
/etc/my.cnf
/etc/mysql/my.cnf
~/.my.cnf
Found mine here:
/usr/local/etc/my.cnf