Noriu parašyti "Ubuntu" analogą "partijos failą" (apvalkalo scenarijų). Tačiau nežinau, kaip naudoti chmod +x filename
komandą, kad skriptą būtų galima paleisti. Taip pat nežinau, kur ją naudoti.
Trumpai tariant, chmod +x
ant failo (jūsų scenarijaus) reiškia tik tai, kad jūs padarysite jį vykdytinu. Dešiniuoju pelės klavišu spustelėkite savo skriptą ir pasirinkite Properties -> Permissions -> Allow executing file as program (leisti vykdyti failą kaip programą), gausite lygiai tokį patį rezultatą kaip ir terminalo komanda.
Jei failas, kurio teises norite pakeisti, yra sisteminiame kataloge, jums gali tekti būti root
, pvz: (būkite atsargūs, naudodami sudo
komandą).
sudo chmod +x /usr/share/testfolder/aFile
Taip pat neaišku, ką tiksliai norite čia archyvuoti. Prašome redaguoti savo klausimą ir išsamiau aprašyti tikrąją problemą!
Taip pat galite remtis šiuo klausimu, kad gautumėte daugiau informacijos: chmod u+x' versus 'chmod +x
terminalo lange įveskite man chmod
(Ctrl+Alt+T) ir gausite tokią išvestį:
NAME: chmod - pakeisti failo režimo bitus
SYNOPSIS
chmod [OPTION]... MODE[,MODE]... FILE...
chmod [OPTION]... OCTAL-MODE FILE...
chmod [OPTION]... --reference=RFILE FILE...
APRAŠYMAS
This manual page documents the GNU version of chmod. chmod changes the
file mode bits of each given file according to mode, which can be either
a symbolic representation of changes to make, or an octal number repre‐
senting the bit pattern for the new mode bits.
The format of a symbolic mode is [ugoa...][[+-=][perms...]...], where
perms is either zero or more letters from the set rwxXst, or a single
letter from the set ugo. Multiple symbolic modes can be given, sepa‐
rated by commas.
A combination of the letters ugoa controls which users' access to the
file will be changed: the user who owns it (u), other users in the
file's group (g), other users not in the file's group (o), or all users
(a). If none of these are given, the effect is as if a were given, but
bits that are set in the umask are not affected.
The operator + causes the selected file mode bits to be added to the
existing file mode bits of each file; - causes them to be removed; and =
causes them to be added and causes unmentioned bits to be removed except
that a directory's unmentioned set user and group ID bits are not
affected.
The letters rwxXst select file mode bits for the affected users: read
(r), write (w), execute (or search for directories) (x), execute/search
only if the file is a directory or already has execute permission for
some user (X), set user or group ID on execution (s), restricted dele‐
tion flag or sticky bit (t). Instead of one or more of these letters,
you can specify exactly one of the letters ugo: the permissions granted
to the user who owns the file (u), the permissions granted to other
users who are members of the file's group (g), and the permissions
granted to users that are in neither of the two preceding categories
(o).
A numeric mode is from one to four octal digits (0-7), derived by adding
up the bits with values 4, 2, and 1. Omitted digits are assumed to be
leading zeros. The first digit selects the set user ID (4) and set
group ID (2) and restricted deletion or sticky (1) attributes. The sec‐
ond digit selects permissions for the user who owns the file: read (4),
write (2), and execute (1); the third selects permissions for other
users in the file's group, with the same values; and the fourth for
other users not in the file's group, with the same values.
chmod never changes the permissions of symbolic links; the chmod system
call cannot change their permissions. This is not a problem since the
permissions of symbolic links are never used. However, for each sym‐
bolic link listed on the command line, chmod changes the permissions of
the pointed-to file. In contrast, chmod ignores symbolic links encoun‐
tered during recursive directory traversals.
SETUID IR SETGID BITAI
chmod clears the set-group-ID bit of a regular file if the file's group
ID does not match the user's effective group ID or one of the user's
supplementary group IDs, unless the user has appropriate privileges.
Additional restrictions may cause the set-user-ID and set-group-ID bits
of MODE or RFILE to be ignored. This behavior depends on the policy and
functionality of the underlying chmod system call. When in doubt, check
the underlying system behavior.
VIETOS
Change the mode of each FILE to MODE.
-c, --changes
like verbose but report only when a change is made
--no-preserve-root
do not treat `/' specially (the default)
--preserve-root
fail to operate recursively on `/'
-f, --silent, --quiet
suppress most error messages
-v, --verbose
output a diagnostic for every file processed
--reference=RFILE
use RFILE's mode instead of MODE values
-R, --recursive
change files and directories recursively
--help display this help and exit
--version
output version information and exit
Each MODE is of the form `[ugoa]*([-+=]([rwxXst]*|[ugo]))+'.
Pirmiausia scenarijuje turi būti nurodyta, kurį interpretatorių naudoti. Tai reikia padaryti pirmoje failo eilutėje. Jei tai apvalkalo scenarijus, tai turėtų būti #!/bin/sh
arba #!/bin/bash
.
Taigi štai scenarijus, kuris įrašo jūsų vartotojo vardą: echo-whoami.sh
#!/bin/sh
echo $(whoami)
Kad jis būtų vykdomas, naudokite chmod +x echo-whoami.sh
. Tada jį galite paleisti naudodami ./echo-whoami.sh
.
"Linux" operacinėje sistemoje partijos failas ir aplinkos scenarijus yra du terminai, iš esmės reiškiantys tą patį. Tačiau terminas skriptas vartojamas daug dažniau.
Paprasčiausiame apvalkalo scenarijaus faile pateikiama tik komanda, kaip ją įvestumėte komandinėje eilutėje (t. y. "Bash" komandų interpretatoriumi). Teoriškai interpreterį galite pakeisti bet kuria jums patinkančia kalba (ir turėti jos interpreterį). Kad būtų aiškiau, siūloma pirmąją eilutę pradėti žodžiais
#!/bin/sh
(jei norite maksimalaus perkeliamumo su senesnėmis sistemomis)
arba
#!/bin/bash
(jei norite papildomų funkcijų, kurios šiandien jums tikriausiai nerūpi)
Po šios eilutės įveskite komandas, po vieną kiekvienoje eilutėje. Yra daug papildomų konstrukcijų, kurios nepatenka į šio klausimo apimtį, žr. man bash
arba http://www.tldp.org/LDP/Bash-Beginners-Guide/Bash-Beginners-Guide.pdf (pradedantiesiems) arba http://www.tldp.org/LDP/abs/abs-guide.pdf (sudėtingesniems klausimams).
Tam, kad iš tikrųjų paleistumėte savo scenarijų, yra du reikalavimai: Pirma, interpretatoriaus procesas turi perskaityti failą, o antra, jis turi patikrinti, ar failas pažymėtas kaip vykdytinas. Patogumo sumetimais taip pat naudinga turėti galimybę rašyti į savo scenarijų (kad prireikus galėtumėte atlikti pakeitimus ar pataisymus).
Darant prielaidą, kad norite, jog komandos nariai ir kiti asmenys taip pat galėtų paleisti (ir matyti) jūsų scenarijų, bet nenorite, kad jie juo manipuliuotų, derinys
a+x
arba +x
, nes a
yra numatytoji),a+r
arba +r
, nes a
vėlgi yra numatytasis variantas),u=w
)paprastai yra protingos jūsų failų teisių reikšmės. Atskirus veiksmus galite įvesti sujungtus, atskirtus kableliu.
Nors ši "veiksmų kalba" yra labai įdomi (atkreipkite dėmesį į +
ir =
operatorių skirtumus, dėl kurių gaunami skirtingi rezultatai, priklausomai nuo leidimų nustatymų prieš juos pakeičiant), juos įvesti yra nuobodu.
Kadangi visi veiksmai sukuria bitų kaukes, kurios yra taikomos viduje, bitų kaukes (žr. man chmod
) galite įvesti ir tiesiogiai.
Kiekvienu atveju chmod 755 myscript.sh yra prasmingiausia naudoti bent 95 % visų atvejų.