Bir "batch file" (kabuk betiği)'nin Ubuntu benzerini yazmak istiyorum. Ancak chmod +x dosya adı
komutunu betiğin çalıştırılabilmesi için nasıl kullanacağımı bilmiyorum. Nerede kullanacağımı da bilmiyorum.
Bir dosya (betiğiniz) üzerinde chmod +x
sadece onu çalıştırılabilir hale getireceğiniz anlamına gelir. Betiğinize sağ tıklayın ve Özellikler -> İzinler -> Dosyayı program olarak çalıştırmaya izin ver seçeneğini seçin, terminaldeki komutla tam olarak aynı sonucu elde edersiniz.
Eğer izinlerini değiştirmek istediğiniz bir dosya sistem dizini içinde bulunuyorsa, aşağıdaki gibi root
olmanız gerekebilir: (sudo
komutunu kullanırken dikkatli olun)
sudo chmod +x /usr/share/testfolder/aFile
Ayrıca burada tam olarak neyi arşivlemek istediğiniz de açık değil. Lütfen sorunuzu düzenleyin ve asıl sorun hakkında biraz daha ayrıntı verin!
Daha fazla bilgi için bu soruya da başvurabilirsiniz: chmod u+x' versus 'chmod +x
Bir terminal penceresine `man chmod' yazın (Ctrl+Alt+T) ve aşağıdaki çıktıyı alacaksınız:
NAME: chmod - dosya modu bitlerini değiştirir
SYNOPSIS
chmod [OPTION]... MODE[,MODE]... FILE...
chmod [OPTION]... OCTAL-MODE FILE...
chmod [OPTION]... --reference=RFILE FILE...
AÇIKLAMA
This manual page documents the GNU version of chmod. chmod changes the
file mode bits of each given file according to mode, which can be either
a symbolic representation of changes to make, or an octal number repre‐
senting the bit pattern for the new mode bits.
The format of a symbolic mode is [ugoa...][[+-=][perms...]...], where
perms is either zero or more letters from the set rwxXst, or a single
letter from the set ugo. Multiple symbolic modes can be given, sepa‐
rated by commas.
A combination of the letters ugoa controls which users' access to the
file will be changed: the user who owns it (u), other users in the
file's group (g), other users not in the file's group (o), or all users
(a). If none of these are given, the effect is as if a were given, but
bits that are set in the umask are not affected.
The operator + causes the selected file mode bits to be added to the
existing file mode bits of each file; - causes them to be removed; and =
causes them to be added and causes unmentioned bits to be removed except
that a directory's unmentioned set user and group ID bits are not
affected.
The letters rwxXst select file mode bits for the affected users: read
(r), write (w), execute (or search for directories) (x), execute/search
only if the file is a directory or already has execute permission for
some user (X), set user or group ID on execution (s), restricted dele‐
tion flag or sticky bit (t). Instead of one or more of these letters,
you can specify exactly one of the letters ugo: the permissions granted
to the user who owns the file (u), the permissions granted to other
users who are members of the file's group (g), and the permissions
granted to users that are in neither of the two preceding categories
(o).
A numeric mode is from one to four octal digits (0-7), derived by adding
up the bits with values 4, 2, and 1. Omitted digits are assumed to be
leading zeros. The first digit selects the set user ID (4) and set
group ID (2) and restricted deletion or sticky (1) attributes. The sec‐
ond digit selects permissions for the user who owns the file: read (4),
write (2), and execute (1); the third selects permissions for other
users in the file's group, with the same values; and the fourth for
other users not in the file's group, with the same values.
chmod never changes the permissions of symbolic links; the chmod system
call cannot change their permissions. This is not a problem since the
permissions of symbolic links are never used. However, for each sym‐
bolic link listed on the command line, chmod changes the permissions of
the pointed-to file. In contrast, chmod ignores symbolic links encoun‐
tered during recursive directory traversals.
SETUID VE SETGID BITLERI
chmod clears the set-group-ID bit of a regular file if the file's group
ID does not match the user's effective group ID or one of the user's
supplementary group IDs, unless the user has appropriate privileges.
Additional restrictions may cause the set-user-ID and set-group-ID bits
of MODE or RFILE to be ignored. This behavior depends on the policy and
functionality of the underlying chmod system call. When in doubt, check
the underlying system behavior.
SEÇENEKLER
Change the mode of each FILE to MODE.
-c, --changes
like verbose but report only when a change is made
--no-preserve-root
do not treat `/' specially (the default)
--preserve-root
fail to operate recursively on `/'
-f, --silent, --quiet
suppress most error messages
-v, --verbose
output a diagnostic for every file processed
--reference=RFILE
use RFILE's mode instead of MODE values
-R, --recursive
change files and directories recursively
--help display this help and exit
--version
output version information and exit
Each MODE is of the form `[ugoa]*([-+=]([rwxXst]*|[ugo]))+'.
İlk olarak, kodunuz hangi yorumlayıcıyı kullanacağını bildirmelidir. Bunu dosyanın ilk satırında yaparsınız. Eğer bu bir kabuk betiği ise, #!/bin/sh
veya #!/bin/bash
olmalıdır.
İşte size kullanıcı adınızı yazan bir betik: echo-whoami.sh
#!/bin/sh
echo $(whoami)
Çalıştırılabilir hale getirmek için chmod +x echo-whoami.sh
kullanın. Daha sonra ./echo-whoami.sh
kullanarak çalıştırabilirsiniz.
Bir batch dosyası ve bir shell script Linux altında aynı anlama gelen iki terimdir. Yine de komut dosyası terimi çok daha sık kullanılır.
En basit kabuk betiği dosyası sadece komut satırında (yani Bash komut yorumlayıcısında) yazacağınız komutları içerir. Teoride, yorumlayıcıyı istediğiniz herhangi bir dille bile değiştirebilirsiniz (ve bir yorumlayıcınız vardır). Daha açık olmak gerekirse, ilk satırınıza şu şekilde başlamanız önerilir
#!/bin/sh
(eski sistemlerle maksimum taşınabilirlik istiyorsanız)
veya
#!/bin/bash
(bazı ekstra özellikler istiyorsanız, muhtemelen bugün umursamıyorsunuzdur)
Bu satırdan sonra her satıra bir tane olmak üzere komutlarınızı girin. Bu soruların kapsamı dışında birçok ekstra yapı vardır, man bash
veya http://www.tldp.org/LDP/Bash-Beginners-Guide/Bash-Beginners-Guide.pdf (Yeni Başlayanlar için) veya http://www.tldp.org/LDP/abs/abs-guide.pdf (daha ileri düzey sorular için) adreslerine bakın.
Komut dosyanızı gerçekten çalıştırmak için iki gereksinim vardır: İlk olarak, yorumlayıcı işlemin dosyayı okuması ve ikinci olarak çalıştırılabilir olarak işaretlenip işaretlenmediğini kontrol etmesi gerekir. Kolaylık açısından, betiğinize yazabilmeniz de yararlıdır (böylece gerektiğinde değişiklikler veya düzeltmeler yapabilirsiniz).
Ayrıca, ekip üyelerinin ve diğerlerinin de komut dosyanızı çalıştırabilmesini (ve görebilmesini) istediğinizi, ancak komut dosyanızı değiştirmelerini istemediğinizi varsayarsak
a+x
veya +x
, a
varsayılandır),a+r
veya +r
, a
yine öntanımlı olduğu için),u=w
)genellikle dosya izinlerinizin mantıklı değerleridir. Tek eylemleri virgülle ayırarak birleştirilmiş olarak yazabilirsiniz.
Bu "eylem dili" çok etkileyici olsa da (değiştirmeden önceki izin ayarına bağlı olarak farklı sonuçlara neden olan +
ve =
operatörünün farkına dikkat edin), yazmaları sıkıcıdır.
Tüm eylemler dahili olarak uygulanan bit maskeleri oluşturduğundan, bit maskelerini (ayrıntılar için bkz. man chmod
) doğrudan da yazabilirsiniz.
Bir kabuk komut dosyası için chmod 755 myscript.sh tüm vakaların en az %95'inde en mantıklısıdır.