Ik wil het Ubuntu-analoog van een "batch file" (een shellscript) schrijven. Maar ik weet niet hoe ik het chmod +x filename
commando moet gebruiken om het script te kunnen uitvoeren. Ik weet ook niet waar ik het moet gebruiken.
chmod +x
op een bestand (je script) betekent alleen, dat je'het uitvoerbaar maakt. Rechts klikken op je script en kiezen voor Eigenschappen -> Permissies -> Toelaten bestand als programma uit te voeren, geeft je exact hetzelfde resultaat als het commando in terminal.
Als een bestand dat je wilt wijzigen zich in de systeemdirectory bevindt, moet je misschien root
zijn, zoals dit: (wees voorzichtig, als je sudo
commando gebruikt)
sudo chmod +x /usr/share/testfolder/aFile
Het is ook niet duidelijk wat u hier precies wilt archiveren. Bewerk alstublieft uw vraag en geef wat meer details over het werkelijke probleem!
U kunt ook verwijzen naar deze vraag, voor meer informatie: chmod u+x' versus 'chmod +x
Typ man chmod
in een terminalvenster (Ctrl+Alt+T) en je'krijgt de volgende uitvoer:
NAAM: chmod - wijzig bestandsmodus bits
SYNOPSIS
chmod [OPTION]... MODE[,MODE]... FILE...
chmod [OPTION]... OCTAL-MODE FILE...
chmod [OPTION]... --reference=RFILE FILE...
OMSCHRIJVING
This manual page documents the GNU version of chmod. chmod changes the
file mode bits of each given file according to mode, which can be either
a symbolic representation of changes to make, or an octal number repre‐
senting the bit pattern for the new mode bits.
The format of a symbolic mode is [ugoa...][[+-=][perms...]...], where
perms is either zero or more letters from the set rwxXst, or a single
letter from the set ugo. Multiple symbolic modes can be given, sepa‐
rated by commas.
A combination of the letters ugoa controls which users' access to the
file will be changed: the user who owns it (u), other users in the
file's group (g), other users not in the file's group (o), or all users
(a). If none of these are given, the effect is as if a were given, but
bits that are set in the umask are not affected.
The operator + causes the selected file mode bits to be added to the
existing file mode bits of each file; - causes them to be removed; and =
causes them to be added and causes unmentioned bits to be removed except
that a directory's unmentioned set user and group ID bits are not
affected.
The letters rwxXst select file mode bits for the affected users: read
(r), write (w), execute (or search for directories) (x), execute/search
only if the file is a directory or already has execute permission for
some user (X), set user or group ID on execution (s), restricted dele‐
tion flag or sticky bit (t). Instead of one or more of these letters,
you can specify exactly one of the letters ugo: the permissions granted
to the user who owns the file (u), the permissions granted to other
users who are members of the file's group (g), and the permissions
granted to users that are in neither of the two preceding categories
(o).
A numeric mode is from one to four octal digits (0-7), derived by adding
up the bits with values 4, 2, and 1. Omitted digits are assumed to be
leading zeros. The first digit selects the set user ID (4) and set
group ID (2) and restricted deletion or sticky (1) attributes. The sec‐
ond digit selects permissions for the user who owns the file: read (4),
write (2), and execute (1); the third selects permissions for other
users in the file's group, with the same values; and the fourth for
other users not in the file's group, with the same values.
chmod never changes the permissions of symbolic links; the chmod system
call cannot change their permissions. This is not a problem since the
permissions of symbolic links are never used. However, for each sym‐
bolic link listed on the command line, chmod changes the permissions of
the pointed-to file. In contrast, chmod ignores symbolic links encoun‐
tered during recursive directory traversals.
SETUID EN SETGID BITS
chmod clears the set-group-ID bit of a regular file if the file's group
ID does not match the user's effective group ID or one of the user's
supplementary group IDs, unless the user has appropriate privileges.
Additional restrictions may cause the set-user-ID and set-group-ID bits
of MODE or RFILE to be ignored. This behavior depends on the policy and
functionality of the underlying chmod system call. When in doubt, check
the underlying system behavior.
OPTIONS
Change the mode of each FILE to MODE.
-c, --changes
like verbose but report only when a change is made
--no-preserve-root
do not treat `/' specially (the default)
--preserve-root
fail to operate recursively on `/'
-f, --silent, --quiet
suppress most error messages
-v, --verbose
output a diagnostic for every file processed
--reference=RFILE
use RFILE's mode instead of MODE values
-R, --recursive
change files and directories recursively
--help display this help and exit
--version
output version information and exit
Each MODE is of the form `[ugoa]*([-+=]([rwxXst]*|[ugo]))+'.
Eerst moet je script aangeven welke interpreter het moet gebruiken. Dit doe je in de eerste regel van het bestand. Als het een shellscript is, moet het #!/bin/sh
of #!/bin/bash
zijn.
Dus hier's een script dat je gebruikersnaam schrijft: echo-whoami.sh
#!/bin/sh
echo $(whoami)
Om het uitvoerbaar te maken, gebruik je chmod +x echo-whoami.sh
. Dan kan je het uitvoeren met ./echo-whoami.sh
.
Een batch-bestand en een shell-script zijn twee termen die onder Linux in feite hetzelfde betekenen. De term script wordt echter veel vaker gebruikt.
Het meest eenvoudige shellscriptbestand bevat gewoon commando's zoals u die op de opdrachtregel zou typen (dat wil zeggen, de Bash-opdrachtinterpreter). In theorie kun je zelfs de interpreter vervangen door elke taal die je wilt (en waar je een interpreter voor hebt). Om explicieter te zijn, wordt voorgesteld om je eerste regel te beginnen met
#!/bin/sh
(als je maximale portabiliteit met oudere systemen wilt)
of
#!/bin/bash
(als u wat extra mogelijkheden wilt, waar u vandaag waarschijnlijk niet om geeft)
Na deze regel voer je je commando's in, één op elke regel. Er zijn veel extra constructies buiten het bereik van deze vragen, zie man bash
of http://www.tldp.org/LDP/Bash-Beginners-Guide/Bash-Beginners-Guide.pdf (voor beginners) of http://www.tldp.org/LDP/abs/abs-guide.pdf (voor meer geavanceerde vragen).
Om je script daadwerkelijk uit te voeren, zijn er twee vereisten: Ten eerste moet het interpreter proces het bestand lezen, en ten tweede controleert het of het gemarkeerd is als uitvoerbaar. Voor het gemak is het ook handig om naar je script te kunnen schrijven (zodat je wijzigingen of correcties kunt aanbrengen mocht dat nodig zijn).
Er verder van uitgaande dat je wilt dat teamleden en anderen ook in staat zijn je script uit te voeren (en te zien), maar dat je niet wilt dat ze het kunnen manipuleren, de combinatie van
a+x
of +x
, want a
is de standaard),a+r
of +r
, want a
is weer de standaard),u=w
)zijn meestal zinnige waarden van uw bestandspermissies. U kunt de afzonderlijke acties aaneengeschakeld typen, gescheiden met een komma.
Hoewel deze "action language" erg fascinerend is (merk het verschil op tussen de +
en de =
operator die verschillende resultaten opleveren afhankelijk van de permissies die je hebt ingesteld voordat je ze veranderde), zijn ze vervelend om in te typen.
Omdat alle acties bitmaskers aanmaken die intern worden toegepast, kun je de bitmaskers (zie man chmod
voor details) ook direct intypen.
Voor een shellscript is chmod 755 myscript.sh het meest zinvol in tenminste 95% van alle gevallen.