Я хочу написать в Ubuntu аналог "пакетного файла" (сценарий оболочки). Но я не знаю, как использовать команду chmod +x filename
, чтобы скрипт можно было запустить. Я также не знаю, где ее использовать.
chmod +x
на файле (вашем скрипте) означает только то, что вы сделаете его исполняемым. Щелкните правой кнопкой мыши на вашем скрипте и выберите Свойства -> Пермиссии -> Разрешить выполнение файла как программы, вы получите точно такой же результат, как и команда в терминале.
Если файл, на который вы хотите изменить разрешения, находится в системном каталоге, вам может потребоваться быть root
, например, так: (будьте осторожны при использовании команды sudo
)
sudo chmod +x /usr/share/testfolder/aFile
Также неясно, что именно вы хотите заархивировать здесь. Пожалуйста, отредактируйте свой вопрос и дайте более подробную информацию о проблеме!
Вы также можете обратиться к этому вопросу для получения дополнительной информации: chmod u+x' против 'chmod +x
Введите man chmod
в окне терминала (Ctrl+Alt+T) и вы'получите следующий результат:
NAME: chmod - изменить биты режима файла
SYNOPSIS
chmod [OPTION]... MODE[,MODE]... FILE...
chmod [OPTION]... OCTAL-MODE FILE...
chmod [OPTION]... --reference=RFILE FILE...
ОПИСАНИЕ
This manual page documents the GNU version of chmod. chmod changes the
file mode bits of each given file according to mode, which can be either
a symbolic representation of changes to make, or an octal number repre‐
senting the bit pattern for the new mode bits.
The format of a symbolic mode is [ugoa...][[+-=][perms...]...], where
perms is either zero or more letters from the set rwxXst, or a single
letter from the set ugo. Multiple symbolic modes can be given, sepa‐
rated by commas.
A combination of the letters ugoa controls which users' access to the
file will be changed: the user who owns it (u), other users in the
file's group (g), other users not in the file's group (o), or all users
(a). If none of these are given, the effect is as if a were given, but
bits that are set in the umask are not affected.
The operator + causes the selected file mode bits to be added to the
existing file mode bits of each file; - causes them to be removed; and =
causes them to be added and causes unmentioned bits to be removed except
that a directory's unmentioned set user and group ID bits are not
affected.
The letters rwxXst select file mode bits for the affected users: read
(r), write (w), execute (or search for directories) (x), execute/search
only if the file is a directory or already has execute permission for
some user (X), set user or group ID on execution (s), restricted dele‐
tion flag or sticky bit (t). Instead of one or more of these letters,
you can specify exactly one of the letters ugo: the permissions granted
to the user who owns the file (u), the permissions granted to other
users who are members of the file's group (g), and the permissions
granted to users that are in neither of the two preceding categories
(o).
A numeric mode is from one to four octal digits (0-7), derived by adding
up the bits with values 4, 2, and 1. Omitted digits are assumed to be
leading zeros. The first digit selects the set user ID (4) and set
group ID (2) and restricted deletion or sticky (1) attributes. The sec‐
ond digit selects permissions for the user who owns the file: read (4),
write (2), and execute (1); the third selects permissions for other
users in the file's group, with the same values; and the fourth for
other users not in the file's group, with the same values.
chmod never changes the permissions of symbolic links; the chmod system
call cannot change their permissions. This is not a problem since the
permissions of symbolic links are never used. However, for each sym‐
bolic link listed on the command line, chmod changes the permissions of
the pointed-to file. In contrast, chmod ignores symbolic links encoun‐
tered during recursive directory traversals.
БИТЫ SETUID И SETGID
chmod clears the set-group-ID bit of a regular file if the file's group
ID does not match the user's effective group ID or one of the user's
supplementary group IDs, unless the user has appropriate privileges.
Additional restrictions may cause the set-user-ID and set-group-ID bits
of MODE or RFILE to be ignored. This behavior depends on the policy and
functionality of the underlying chmod system call. When in doubt, check
the underlying system behavior.
ОПЦИИ
Change the mode of each FILE to MODE.
-c, --changes
like verbose but report only when a change is made
--no-preserve-root
do not treat `/' specially (the default)
--preserve-root
fail to operate recursively on `/'
-f, --silent, --quiet
suppress most error messages
-v, --verbose
output a diagnostic for every file processed
--reference=RFILE
use RFILE's mode instead of MODE values
-R, --recursive
change files and directories recursively
--help display this help and exit
--version
output version information and exit
Each MODE is of the form `[ugoa]*([-+=]([rwxXst]*|[ugo]))+'.
Во-первых, ваш скрипт должен объявить, какой интерпретатор использовать. Это делается в первой строке файла. Если это shell-скрипт, то это должно быть #!/bin/sh
или #!/bin/bash
.
Итак, вот сценарий, который записывает ваше имя пользователя: echo-whoami.sh
#!/bin/sh
echo $(whoami)
Чтобы сделать его исполняемым, используйте chmod +x echo-whoami.sh
. Затем вы можете запустить его, используя ./echo-whoami.sh
.
пакетный файл и программный сценарий - два термина, означающие в Linux практически одно и то же. Однако гораздо чаще используется термин сценарий.
Самый простой файл сценария оболочки просто содержит команды, которые вы набираете в командной строке (то есть в командном интерпретаторе Bash). Теоретически вы даже можете заменить интерпретатор на любой язык, который вам нравится (и для которого у вас есть интерпретатор). Чтобы быть более явным, рекомендуется начинать первую строку со слов
#!/bin/sh
(если вы хотите добиться максимальной переносимости с устаревшими системами)
или
#!/bin/bash
(если вам нужны некоторые дополнительные возможности, которые, вероятно, сегодня вас не волнуют)
После этой строки введите свои команды, по одной на каждой строке. Существует множество дополнительных конструкций, выходящих за рамки данного вопроса, смотрите man bash
или http://www.tldp.org/LDP/Bash-Beginners-Guide/Bash-Beginners-Guide.pdf (для начинающих) или http://www.tldp.org/LDP/abs/abs-guide.pdf (для более продвинутых).
Для того, чтобы ваш скрипт действительно выполнялся, есть два требования: Во-первых, процесс интерпретатора должен прочитать файл, а во-вторых, проверить, помечен ли он как исполняемый. Для удобства также полезно иметь возможность записи в ваш скрипт (чтобы вы могли вносить изменения или исправления в случае необходимости).
Предположим далее, что вы хотите, чтобы члены команды и другие люди также могли запускать (и видеть) ваш скрипт, но не хотите, чтобы они могли им манипулировать, комбинация следующих действий
a+x
или +x
, поскольку a
используется по умолчанию),a+r
или +r
, так как a
опять же по умолчанию),u=w
)обычно являются разумными значениями прав доступа к файлам. Вы можете вводить отдельные действия в сочетании друг с другом, разделяя их запятой.
Хотя этот "язык действий" очень увлекателен (обратите внимание на различие операторов +
и =
, которые приводят к разным результатам в зависимости от того, какие разрешения были установлены до того, как вы их изменили), вводить их утомительно.
Поскольку все действия создают битовые маски, которые применяются внутри, вы можете набирать битовые маски (см. подробнее man chmod
) также напрямую.
Для shell-скрипта chmod 755 myscript.sh имеет смысл, по крайней мере, в 95% случаев..